DO IT YOURSELF LAWN IRRIGATION

Installing lawn belt system does not present any difficulty. Any person can set up the sprinkler system in several hours. In so doing the lawn itself is not damaged greatly. Inessential seams vanish completely in just a week. It is no need to wait till your lawn will be covered with nice grass again. The lawn belt do-it-yourself sprinkler irrigation system is the ideal option for any lawn or garden. It is simply connected to the house faucet. This procedure will take only several minutes. In the specialty store you can purchase a hose which should be attached from the faucet to the lawn belt system.
Moreover it is no need to take the sprinkler system away as the winter is approaching. It can remain in the ground during the whole winter.

In order to install lawn belt system you will need: a spade, a turnscrew, utility knife and 5/16 nut wrench. The lawn belt can be easily assembled even by those persons who have never set up an inground system.
The process of lawn belt system is the following. First the lawn sprinkler heads should be connected to the lawn belt cut. Collar halves are fastened together with either a 5/16 nut wrench or a turndriver. Then one has to make a slit using a spade. Its depth should be 3 or 4 inches. Beginning from the faucet, put your tubing and heads of lawn sprinkler into the slit in the ground. Then fasten the lawn belt firmly by pressing your foot over it. The last step consists in connecting the garden hose to the house faucet.

It is obvious that the installation of lawn belt sprinkler system is very easy. After the installation you can enjoy the process of lawn irrigation without any worry. In accordance with your wish you may install a timer or some other devices. If you want to add some supplementary sprinkler areas you can purchase a 4-way distributor kit. Lawn belt is a wonderful system for your lawn and garden that will save your time and of course money!